Savaria offers the V-1504 vertical wheel chair platform lift, the most versatile lift on the market. The unique drive and platform combinations of the V-1504 vertical wheel chair platform lift allows for rapid delivery and ease of installation in respect to any architectural requirements.	Standard Equipment 750 lb (340 kg) capacity Maximum travel of 23’ (7,000 mm)* Travel speed: 25 feet/min (0.13 m/s) approx. 34” x 54” (864 x 1,372 mm) minimum platform dimensions 115 VAC operation (115 VAC up direction and 2 VDC battery down) Emergency battery lowering Remote location emergency manual lowering valve 2.1 chain hydraulic drive system Gear type hydraulic pump 8 foot long modular guide rail assembly Roller guide shoes 1.5 hp (1.119kW) output Electronic free relay logic controller Automatic battery recharging system (115 VAC) Combination mechanical lock and electric contacts or electric strike* Low voltage controls Normal limit switch Control buttons on platform* Keyed call station Continuous pressure directional buttons 42” (1,067 mm) high side guard panels Non-skid platform surface Beige acrylic urethane paint on all steel surfaces No machine room required Top of page
V1504 - STD The standard model is built around a powerful hydraulic system which can raise a platform and the users throughout various architectural boundaries. It is designed to fit indoor hoistway applications and also for outdoor use. V1504 - TL The tall enclosure model is designed to provide an enclosure with metal inserts from the bottom landing door to the top landing gate. It is a good alternative to a three gate system because of its simplicity and ease of operation V1504 - PE & ALPE The plexiglass enclosure model is designed to provide an aesthetic enclosure with plexiglass inserts. It is available with various travels and is offered with top landing gate for semi-enclosed hoistway or with top landing door, enclosure extension and plexiglass dome for both indoor and outdoor applications. The ALPE model is made of an aluminum enclosure and a yellow zinc treatment on steel parts to withstand the outdoor environment. V1504 - LUX The luxury model has been created to meet those very personalized architectural needs. It is a rich blend of tempered glass, stainless steel or brass materials. It is designed with a bottom landing door and top landing gate or door. V1504 - MOB The mobile model is a lift that can be rolled inside a building to any low rise barrier in order to become wheelchair accessible. It easily stores out of sight when not in use. V1504 - Prestige The prestige model is a lift designed to meet those very personalized architectural needs. It is constructed with high quality glass and brass materials, and will blend in with any high quality/look environment.	Optional Equipment Special platform dimensions up to 18 ft2 (1.67 m2)* Enter/exit same side 90º exit Intermediate stops Platform gate Top landing gate 115 VAC operation (115 VAC up direction and 12 VDC battery down) Upper/lower landing door 80" (2,032 mm) Flush mounted 80" (2,032 mm) door and frame, 1H1/2 ULC fire-rated Portable unit package Stair bridge Flip up seat Custom color Public building package conforms to CSA-B355 and ASME A18.1* Emergency light and alarm Direct hydraulic drive system Outdoor package including electro-deposited yellow zinc coating Motorized door *Consult local codes and regulations Top of page
Unique Features	Specifications Rated Load 750 lb (340 kg) Rated Speed V1504 Models: PE - STD - TL 25 f.p.m.(nominal) (0.13 m/s) V1504 Models: Lux - Prestige 25 f.p.m.(nominal) (0.13 m/s) Up to 11'10" of travel Usable Car Dimensions 34’’ x 54’’ (864 X 1,372 mm) Levels Serviced 2,3,4 # of Openings 2 Car Access Enter/Exit same side, 90o exit, front/rear Max. Travel 23 feet (7,000 mm) Operations Constant Pressure Power Supply 110 volt, 15 amp, 1 phase, 60 Hz Drive System 2:1 Roller chain hydraulic Emergency PowerBattery operation in down direction Controller Electronic-free relay logic Motor/Pump 110VAC, 1.5HP Manual Lowering V1504 Models: PE - STD - TL Outside the hoistway at desired landing V1504 Models: Lux - Prestige On the side of the drive tower Top of page

The ES-125 stair wheelchair lift is designed for both residential and commercial use. Its compact folding platform leaves the stairway virtually unobstructed when not in use. It can be used both indoors and outdoors.	Standard Equipment Aluminum extruded rail Continuous pressure buttons Mechanical access ramps One deflector sheave Cable driven unit Safety underpanel sensor 2 grab rails on car Keyed call/send controls on platform and at each landing Safety Brake Wall mounted call / send controls Obstruction sensors ABS plastic carriage covers Textured anti-slip surface on platform and ramps Car folds within 11" (279mm) of wall Top of page
Unique Features	Optional Equipment 3-position manual safety armrests Motorized 2 position safety armrests Fold-down seats with safety belt Powered fold platform Touch sensitive plate on the access ramps and under the platform to stop the lift if an obstruction is encountered 12 volt battery operation Hand-held pendant control on the platform Split rail Drive cabinet at top landing Audio visual alarm Motor with electro-mechanical brake Emergency stop switch Custom color Post for call/send station Outdoor package Zero clearance at top landing to avoid landing door (Not available on Plus model) Fire service function Pre drilled guide rail for masonry walls Joined guide rail for ease of access on narrow sites Self-support posts Manual lowering device Three (3) sided access to platform with motorized lateral access ramp Flush cabinet at front or back of rail (Plus system) Self-support posts Top of page
Specifications Platform Dimensions Type I: 27.50" x 36" (700 x 914 mm) Type II: 28.50" x 44" (724 x 1,118mm) Type III: 30" x 48" (762 x 1,219 mm) Type IV: 30" x 44" (762 x 1,118 mm) All platforms have non-skid surfaces. The platform can be folded manually or with the help of an optional power-fold platform. Once folded the unit uses very little space in order to leave the staircase virtually unobstructed. Access ramps Two positive action automatic access ramps for straight or 90° entry Motor assembly 110 VAC, ½ hp (373 W), 1,750 rpm / gear reducer: 50:1 Type of drive unit Standard system: Aircraft cable 3/16" (5 mm) with breaking load of 4,200 lbs (1,950 kg), deviator pulley and winding drum in a machine room. Plus system: Roller chain #50 and aircraft cable with breaking load of 6,100 lbs (2,767 kg). The electric motor gear reducer and controller are self enclosed at the top landing in a drive cabinet. No machine room required. Controller Meets CSA and ETL standards - 24 VAC operating controls Power Supply 110 VAC, 1Ph, 60Hz, 15 amp Rated speed 14.0 ft / min. (0.071 m / s)(approx.) Capacity One person in a wheelchair Rated load 450 lbs (240 kg) Operating controls* Continuous pressure directional buttons are installed on the platform with a key switch for increased safety. (*) Call stations Continuous pressure directional buttons are installed at each landing. Finish One coat of primer and two coats of beige acrylic urethane paint on all steel surfaces. Safety features Automatic dual access ramps, mechanical emergency brake in case of drive system failure, slack cable switch, keyed continuous pressure controls and upper / lower limit switches are standard features on this unit.	Top of page